Applies To | |
Product(s): | AutoPIPE |
Version(s): | ALL; |
Area: | Reports |
Date Logged & Current Version | March 2023 23.00.00.230 |
How to generate a report on only a portion of the model using Report Manager in AutoPIPE?
Perform the following steps:
Step 1. With model open, analyze the system
Step 2. Select portion of model where results are to be limited too.
Step 3. Important, use AutoPIPE's command Output Report (Result > Quick Reports > Output Report)
Step 4. On the quick report dialog enable the "Limit reports to highlighted points", also, add one or more sub reports to the Right column or under Selected Reports, and press OK button.
Step 5. With the node points still select and highlighted Red, use AutoPIPE command, Report Manager (choose any of the options, i.e Text reports, Word reports, or Excel report.
Step 6. Configure the Results manager report as needed, only those items highlighted will become apart of the generated results.
Notes:
1. If the reports are blank or contain no node point results, confirm that the model has highlighted node points.
2. When completed, and want to see Report manager reports on all node points, again, repeat step 3-4 above, removing the "Limit reports to highlighted points", option, and then continue with steps 5-6.
3. When "No Rows returned from xxxxReport!", appears see note #2 above.