1. AutoPIPE Preview Handler error on installation

2. Closed loop detected in imported model at TEE point XXX.

3. E15-13: PXD file is needed for accessing AutoPLANT data in this model Please place PXD and PXH files in same directory as DAT file.

4. E13-16: Cannot Find the specified units file

5. E21-40: Executing this operation can corrupt distributed load records in AutoPIPE

6. E38-95: Cannot insert component after a tee

7. E90-21: Analysis results do not exist

8. E90-43:   Structural Synchronizer not installed on the system.

9. E102-155: This point must be an anchor/reference point

10. E102-161: This point does not have reference point defined

11. E119-1: Maximum number of load combinations exeeded

12. E131-30: AUTOPIPE.CLR not found

13. E154-16: This value must be between 0 and 2, recommended value is 0.5

14. E156-38: Value must be greater than zero

15. E175-28: Error in velocity profile specification

16. E221: Please contact Rebis

17. E511-1: Invalid AutoPIPE data file

18. E512-65: the model cannot be opened

19. E512-109 cannot open Projectwise model

20. E512-149: Model name must not contain space character before extension

21. E514-2: Unable to retrieve Time History Load and Time History files

22. E516-8: Demo version limit of 20 points exceeded

23. E516-11: Analysis terminated: model must have more than one point

24. E521-22: Base point is not on selected range

25. E521-24: No range specified for copying

26. E522-32: Cannot find clipboard file in current directory

27. E522-33: Cannot complete the paste operation

28. E523-21: No Range specified for rotation

29. E527-25: Point not found in selected range

30. E723-23: System is not complete for analysis purposes

31. E726-104: Zero length not allowed at beam XX

32. E732-2: Angle is 180 deg. at bend xxx

33. E732-3: Not enough clearance to fit bend xxx

34. E737-26: Valve components are not permitted in HDPE pipe system as per CC N-755-1

35. E751-1 Tee type gt 8 or lt 1. SIF not calculated

36. E774-44: Equation requires more combinations to be complete

37. E801-1: FATAL ERROR: Unstable System

38. E801-3: No static load cases specified

39. E801-4: Zero length element

40. E801-5: Zero Element Stiffness in AutoPIPE

41. E801-6: Zero flexible length beam

42. E801-11: Fatal Error: no mass in the system

43. E801-12: Cannot find next frequency

44. E801-24: Number of MSRS groups is inconsistent with SAM case - Error Message in AutoPIPE

45. E801-62: Unable to process any time history function

46. E801-64: Undefined point name in time history load data

47. E801-75: Cannot allocate memory for analysis, unload some applications.

48. E801-135: Number of analysis nodes exceeds maximum limit of 10000 nodes

49. E829-1: Incorrect model size in file Static analysis results will be ignored.

50. E951-3: Expecting real input. Re-enter

                 Answer: insert a valid value into the current field before selecting a different cell / OK button. 

51. E962-1: File read error, please contact BENTLEY

52. E962-2: File write error, check disk space

53. E963-8: Non-ascii characters or "?" are not permitted in name

54. E963-21: Number of characters in name cannot exceed 48

55. E2164-15: Qualified stress for all bend and tee components should be greater than zero

56. Error 1316 - A network error occurred while attempting to read from the file 

57. LoadLibrary failed with error 87 

58. LoadLibrary failed with error 1114: A dynamic link library (DLL) initialization routine failed

59. No load case is selected to print time history results

60. No Piping with OD >= 1.400 inches is found in PXF file

61. "Root Element Is Missing"

62. The model you are about to open as last modified in a newer version...
63. Time history analysis file (*.TIM) does not exist.

Also See:

Warnings, Errors, Crashed, Confirm Messages