You are currently reviewing an older revision of this page.
What does the following warning mean from the model consistency check report and how to resolve?
W726-195:Support D10 1-Zero length from 'supported' to 'connected' point
A support has 2 connection end points, Supporting and Supported:
Supporting, node point that is being supported (i.e. D10) by a support
Suppported, location that the support is connected to (ie. Ground, or beam/pipe node point).
This warning (W726-195) is being displayed because the 2 points have exactly the same coordinates. Typically the 2 points should have different coordinates.
Example: if a pipeline is resting on a beam, the pipe node point (A02) directly above the beam node point (M2) are seperated by the centerline distance between the beam and pipe.
Please see the following AutoPIPE help section: Help > Contents> Contents Tab> Modeling Approaches> Modeling Approaches> Frames for 3 methods of connecting pipe supports to beam/frame structures.
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!