Note: if an enhancement or defect has not been added to the program, log an Service request for that enhancement. The more requests logged per an enhancement, the quicker the CAE development team will add that feature to the program.

Select one of the following piping codes to see the enhancements and defects that have been logged for inclusion into a future version of AutoPIPE:  

1. ASEM B31.1 
        Power Piping

2. ASME B31.3
        Process Piping

3. ASME B31.4 & Chpater IX
        Liquid Transportation Systems for Hydro-carbons, Liquid Petroleum Gas, Anhydrous Ammonia, & Alcohols
        Offshore Liquid Piping Systems
   

4. ASME B31.5
        Refrigeration Piping and Heat Transfer Components

5. ASME B31.8 & Chapter VIII
        Gas Transmission & Distribution Piping Systems
        Offshore Gas Transmission

6. ASME B31.11
       Slurry Transportation Piping Systems
   

7. ASME B31.12
       Hydrogen Piping and Pipelines standard

8. ASME B31G
        Manual for Determining the Remaining Strength of Corroded Pipelines

9. ASME BPV-III-1-NB, NC, & ND
       Boiler & Pressure Vessel Code, Rules for Construction of Nuclear Power Plant Components Division 1,
       Subsection NB, Class 1, 2, & 3 Components

10. ASME NM
        -1 Thermoplastic Piping Systems,
        -2 Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems
        -3 Specifications for nonmetallic materials
        As of Jan 2020, ASME NM is not yet adopted by the B31 committees

11. BS806
        Design and Construction of Ferrous Piping Installations For and In Connection with Land Boilers

12. BS7159
         Design and Construction of Glass Reinforced Plastics (GRP) Piping Systems for Individual Plants or Sites

13. BSI PD8010
         British Standards Institution
         PD 8010-1: Code of practice for pipelines - Part 1: Steel pipelines on land
         PD 8010-2: Code of practice for pipelines - Part 2: Subsea pipelines
         PD 8010-3: Code of practice for pipelines - Part 3: Guide to application of pipeline risk 
         PD 8010-4: Code of practice for pipelines - Part 4: Code of practice for integrity management
         PD 8010-5: Code of practice for pipelines - Part 5: GUIDE TO OPERATIONALPRACTICE

14. CSA 289
         Canadian Standards Association, General Requirements for Seismic Qualification of CANDU Nuclear Power Plants

15. CAN/CSA-Z662 & section 11
         Canadian Standards Association, Oil and Gas Pipeline Systems
         Canadian Standards Association, Offshore Steel Pipelines
16. DNV
         Norwegian Piping Code, Rules for Submarine Pipeline Systems
17. EN1991
         EN 1991: Actions on structures
18. EN13480 
         EN 13480 European Standard for Metallic Industrial Piping
19. EN13941
             Design and installation of preinsulated bonded pipe systems for district heating 
20. General
         General Piping Code

21. GOST

           Russian National Standards

22. ISO 14692
         Petroleum and Natural Gas Industries, Glass-Reinforced Plastics (GRP) Piping
23. JSME S NC1-PPC
        Japan Society of Mechanical Engineers (JSME) Rules on Design and Construction for Nuclear Power Plants, Class 2 Piping
24. KHK Level 1 & 2
         KHK E 012 Japanese Piping Code for Seismic Loads, Level 1 & 2
25. MITI501
         Technical Standards for Construction of Nuclear Power Plant Components - MITI Notification No. 501
26. RCC-M
         French Piping Code for Power Industry
27. RD 10-249-98
            Russian Regulatory Documents -  Strength Analysis Code For Land Based Boilers, Steam And Hot Water Pipelines

28. SNCT
         French Piping Code for Process Industry

29. SNiP
         Russian Trunk Pipelines Code   

30. SPC
         Swedish Piping Code, Code for Piping in Stationary Plants (Stress Analysis - Method 2)

31. STOOMWEZEN (D1101)
         Dutch Piping Rule D1101 of the Rules for Pressure Vessels

32. TBK5-6

         Norwegian Pressure Vessel Committee, General Rules for Piping Systems
33. CAE-CR-3582: Apply 2 or more piping codes in the same calculation 

         Fixed version: TBD
    
    Workaround: Suggest analyzing the model or creating multiple models each one using a different piping code. Then select, review, and print the output for just the applicable run of pipe per the required code.
    
    Example, run analysis using ASME NB Nuclear piping code, select the node points that must be analyzed per ASME NB code, create an output report "Limit results to highlighted points", and repeat above steps after selecting a different piping code, etc...
    

See Also

AutoPIPE Enhancements Requests and Logged Defects

Bentley AutoPIPE