You are currently reviewing an older revision of this page.
The following is displayed in model consistency check report:
W726-6: Near zero length element at point XXX
This warning message is displayed whenever the distance between 2 node point s is very very very small.
Select the indicated node point and move it away from the nearest node point (ie. bend Near / Far Point, or stretch it a small distance away from the nearest node)
Select the indicated node point and decide if it is really necessary to the model, consider deleting it completely from the model.
Select the indicated node point and consider moving the nearest node point away from the indicated node point (i.e. make bend radius a bit smaller, or stretch nearest node point a small distance away from the indicated node point).
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!