You are currently reviewing an older revision of this page.
The customizable Stress Isometric plot is created using the Alias ISOGEN Engine and shows a) fully dimensioned isometric plot b) tables of important summary design data including model information, pipe properties, valve and flange data, maximum stresses, design support data, design spring and constant hanger data, design load data for vessels, structures and equipment.
The File> Save Stress Isometric command starts this process and relies upon many different files to store settings (marked in red) used by isogen to create the output drawing file:
These setting files are stored in two locations:
C:\ Bentley \ AutoPIPE V8i SELECTseries4
C:\ Bentley \ AutoPIPE V8i SELECTseries4 \ PISOGEN\PROJECTS \ APIPEPROJ \ FINAL \
The following is dedicated to comments, questions, and answers about these settings files.
Avoidance: add modifications before the "SYMBOL-KEYS" block. i.e.In addtion, the FLS file can be overwritten completely. So we have to logged an enhancement to stop this from happening.
A. Define Line Number in an model
B. On exporting to Stress ISO checked the option "Line Number"
C. Then you can see the Line Number text on the exported drawing
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!