You are currently reviewing an older revision of this page.
Note: if an enhancement has not been added to the program, log an Service request for that enhancement. The more requests logged per an enhancement, the quicker the CAE development team will add that feature to the program.
Steps to Repeat:
1.Open MSRS_Example model2.Delete imposed displacement at point 173.Running "Consistency Check" reports "W2143-29:Response spectrum case R1 has support group 3 that is no longer defined in model."4.Running "Analyze All" command gives message "E801-24: Number of MSRS groups is inconsistent with SAM case"5.Open dynamic analysis dialog and go to Response Spectrum tab6.Click on define button in Spectra column7.Notice that the support group 3 is not available.8.Press OK, and again press OK to close dynamic analysis dialog.9.Run consistency check and analyze all commands and notice that the message is still given.
Workaround:
- Open dynamic analysis dialog- Go to Response Spectrum tab.- Click on define for load sets reported in consistency check- Change a single scale factor or just write same value again.- Click apply button & then click OK.- Click OK to close dynamic analysis dialog.- Run Consistency check and Analyze All commands and notice that no message is given this time.
Found in build: 09.06.01.11
Updated Version: TBD
Description:
Include buoyancy load to copy from one model to another model
After the rotate dialog appears, add a button that enables the user to specify a rotate point using the pc mouse instead of keying in a value.
Rotate geometry, supports, local and global static loads.
Updated Project: 9.6.0.15
Enhancements Requests and Logged Defects
Bentley AutoPIPE