You are currently reviewing an older revision of this page.
The following Dynamic Analysis enhancements have been logged for inclusion into a future version of AutoPIPE:
Note: if an enhancement has not been added to the program, log an Service request for that enhancement. The more requests logged per an enhancement, the quicker the CAE development team will add that feature to the program.
Description:
For time history post processing plots, add feature to enable user to specify x-axis limit > 1 sec.
Corrected Version: TBD
Corrected Version : TBD
This would be similar to Load/Fluid Transient and would call Load/Slug flow User enters: Slug velocity, slug length, liquid density and starting and ending point of slug as in fluid transient. Program generates TIH and THL files as per admin training notes.
I would like to have a module that can automatically calculate the slug load magnitude, create the time histories for the bends and apply them.
Should be a simple thing to create and could use some of the routines from fluid transient.
Program should block dynamic analysis if first analysis set not analyzed. There is an internal limitation of the program that the first static analysis set should always be selected for analysis if there is any dynamic analysis to be performed for the model. AutoPIPE historically had only 1 load set prior to 9.1.0, all of the definitions related to dynamic load cases etc used to be associated with this single load set. In the new system – this older load set is mapped to the first static analysis set.
Corrected Version: 9.6.0.10
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!