You are currently reviewing an older revision of this page.
When I try to import an AutoPIPE .dat model in to another .dat model it gives the following error:
---------------------------Error--------------------------- E522-33: Cannot complete the paste operation. The verical axis for the current model and clipboard must be the same.---------------------------OK ---------------------------
The Vertical axis direction in both models are different. In order to import or copy clip one model into another, the Vertical axis direction must be identical (i.e. Y-axis OR Z-axis).
Fix by changing the axis direction in model (Tools> Model Options> General> Vertical axis direction) to be the same as the other model interfacing with.
Error Messages displayed in AutoPIPE
Bentley AutoPIPE