You are currently reviewing an older revision of this page.
After installing AutoPIPE the following is displayed when trying to open the program:
---------------------------autopipe.exe - Unable To Locate Component---------------------------This application has failed to start because IEGLicLib.dll was not found. Re-installing the application may fix this problem. ---------------------------OK ---------------------------
How to fix this issue?
Download and install Bentley IEG Services. This is a separate download from AutoPIPE that should have been a dependencies that was checked during the original download process.
Bentley IEG – Confirm / Download / Install
Installer must be logged onto the computer with Administration privileges, please do not assume that you have the rights, confirm.
Products that utilize the Bentley IEG License service include:
If your application is not listed above you do not need to install IEG.
Win XP:
Open Control Panel> Add/Remove Programs> Select the words “Bentley IEG License Services”. The following view will appear.
Select “Click Click "here for support information”.
Win 7:
Open Control Panel> Select "Programs and Features", search the list for Bentley IEG License Services and look to see what version is installed.
Version number should be 02.00.18.02. If your version is lower: uninstall current version, download new version, install new version, and reboot the computer.
Open internet explorer web site http://selectservices.bentley.com/en-US/
1. Select “Software Downloads”
2. Log into web site
3. In the “Search By:” area, Select radio button next to “Product”, and select “IEG Product” from drop down list
4. In the "Filter By:" section, change "Files Posted within last" from “6 months” to "ALL"
5. Press the “Search” button at the bottom of the web site
6. Note: Far right column notifies you of the OS for which the application is Certified On. Installing the application on any other OS will be at your own risk and will not be supported.
7. Select the correct version of Bentley IEG to download. Current version is Bentley IEG License Service 02.00.20.01, released 2/14/2012. Place a check in the box next to the name.
8. Press “Continue” button located in the bottom right corner
9. Select Delivery method, Default Download, you can chose Down load or Burn CD (an official CD will be mailed). Press “Continue” button
10. Download Procedure Read the Legal Terms of Use statement. If you agree, press the “Accept” button. Then press the “Advanced Download Manager” button. Provide pathname to download the file to and finally press the “Start Download” button.
11. Burn CD Procedure Select the “Continue” button, provide shipping information, and press the “Complete” button.
IEG must be installed by user with Admin privileges and cannot be pushed over a network connection. Please confirm you are logged on as an admin user, do not assume.
1. Un-install any previously installed version of Bentley IEG License Service from Control Panels 'Add or Remove Programs' or "Program and Features"
2. Locate the IEG file downloaded or insert the CD.
3. Select “Start” , “Run”, or “Browse”
4. Open the folder and run “iegls02002001en.msi”
5. Accept all the Default settings.
6. When completed, reboot your computer.
7. See Step #1 to confirm IEG has been installed
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!