Help > Contents> Contents Tab> Reference Information> Code Compliance Calculations> select a piping code to see the calculations performed by AutoPIPE.
Item #1: How to calculate B31.8 code allowable of per code equation:
Item #2: How to calculate the combined stress for a node point, equation used, and individual values being applied in the equation?
Item #3: ASME B31.8, the hoop stress uses the D/t ratio to decide which formula to use, thin or thick, what is AutoPIPE doing?
Item #4: Using ASME B31.8 2012, how is the hoop stress being calculated in AutoPIPE?
Item #5: ASME B31.8, AutoPIPE does not seem to consider the bending stresses in the pipe due to large diameter elastic bends ( 1200 m). it only reports the stresses due to pressure , temperature and gravity . can any one help ?
Item #6: Why are Hydrotest results different using AutoPIPE ASME B31.8 piping code?
Item #7: How can I set the RESTRAINED pipe option for B31.8 2007 onshore / underground piping?
Item #8: Why are the Stress results for ASME B31.8 (2014) 0.00 in AutoPIPE's results Grids and output reports?
Item #9: Calculate the Hoop code stress and the hoop allowable?
Piping Code Calculations
Bentley AutoPIPE