You are currently reviewing an older revision of this page.
Q1. How can i apply thermal bowing on only the analysis set 3. When i check the thermal bowing option for analysis set 3 it is also checked for the other analysis set. this occurs in spite of the fact that i specified : apply thermal bowing to thermal case t2 only in thermal bowing definition window.
Answer: Thermal bowing application or non-application is selected once and applies to all analysis sets. It gets associated with the load case you identify on thermal bowing dialog and after that it can be controled at the segment level i.e. determine on which segments to apply and which ones to ignore/skip. This may be confusing to some users as they enable it inside of an analysis set and there is no warning / message that it will be applied to ALL analysis sets.
The CAE develpment team is considering one of two options:
A. Consider making it an analysis set specific option
B. Add a warning that this applies to all analysis sets.
Bentley AutoPIPE
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article tothe "Comments" area below. THANK YOU!