A weld summary report can be created by adding the CT_WELD component type to the INCLUDE keyword in the report as follows:
INCLUDE = IE_TYPE=CT_WELD COLUMN = 6:C:WELDID
In order to display the weld report on the drawing, it must be tied to a text node with the NODE keyword.
To include the weld id of the weld labels in your weld summary report, specify the WELDID keyword for one of the columns. The NODE keyword specifies the location of the report in the drawing.
INCLUDE = IE_TYPE=CT_WELD EXCLUDE = IE_FIELD=0 COLUMN = 6:C:WELDID
Dimensions always stop at field welds, which ensure cut lengths are properly defined. No user configuration available.
To check on adding Field Fit Weld length, Click here> > > for reference. Also check See Also Section for link.
The User Labels section in the Configuration Manager is used to control the placement of Weld Labels in the drawing.
Open the Isometrics Configuration tool
From the Isometric Configuration dialog:
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/24621.how-to-assign-fieldfit-weld-allowances-or-other-weld-types-for-bom-cut-list-in-openplant-isometrics-manager
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12642.configuring-the-bom-and-reports
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!