How to Turn on Centerline Visibility of Pipelines


  
 Applies To 
  
 Product(s):OpenPlant Modeler
 Version(s):08.11.09.XXX
 Environment: Windows 7 64 bit
 Area: Component
 Subarea: Graphics
 Original Author:Kestutis Mitkus, Bentley Technical Support Group
  

In OpenPlant Modeler, after Section clip placement and projection generation User is willing to have all centerlines visible. 

Background

During Modeling in OpenPlant Modeler after Section clip placement, pipelines axes are shown only in the case where the sectional surface intersects the tube. Below are the steps of how to turn on Centerline visibility. 

Steps to Accomplish

  1. Open "View Attributes" dialog
  2. In this Dialog go to "OpenPlantModelerSettings" section.


  3. Click "Promote" button and check the Centerline checkbox

Below is a brief demonstration video with above described steps.

See Also

See Similar link for related problem on placement issue:

http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/22659.how-to-show-centerline-on-hvac-ducts

 

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!