To Get Shop Field information for welds in OpenPlant Isometrics Manager.
In OpenPlant Isometrics Manager, there was requirement to get Shop, Field or other weld details under weld Reports. User need to assign it first in Model and based on that it can be produced inside the OpenPlant Isometrics Manager. Below steps has been described in context with OpenPlant Modeler and OpenPlant Isometrics Manager. However similar approach can be used in context with AutoPLANT Modeler and OpenPlant Isometrics Manager.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/19833.how-to-add-weld-tag-as-fwffw-on-isometrics-weld-in-openplant-isometrics-manager
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!