Applies To
	Product(s):	OpenPlant Isometrics Manager
	Version(s):	08.11.11.87 - SS6
	Environment:	Windows 7 (64 bit)
	Area:	Settings/Attributes
	Original Author:	Michelle Saucier, Bentley Product Advantage Group

Background

In OpenPlant Isometrics Manager, to turn off Hatching lines for OpenPlant Isometrics Manager. It has been included with new release of OpenPlant Isometrics Manager & are available under node - Rolling Offset Depiction. Below are the steps to get the desired pattern. 
 

Steps to Accomplish

1. Launch OpenPlant Isometrics Manager.
   
   
   
   
2. Select Project unit, say OPModeler_Imperial here and click OK.
   
   
3. In Isometrics Configuration>Isometric Style>Rolling Offset Depiction>Hatch Properties>Angle Annotation.
   
   
   
   
4. In Isometrics Configuration>Isometric Style>Rolling Offset Depiction>Hatch Properties. See default settings dialog below.
   
   
   
   
5. Change Spacing to 0, and uncheck "Show right Angle Symbol". Save and close.
   
   
   
   
6. Generate New ISO Sheet, this will eliminate both the hatching lines and right angle symbol from the ISO Sheet. 
   
   

See Also

communities.bentley.com/.../13393.settingsattributes-openplant-isometrics-manager

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!