OpenPlant Modeler Field Reference to be checked with below table mentioned to assist user to use various fields applied in specs catalog use. User may also take reference from help file menu.
The following table is a reference to the fields contained in factory-shipped Bentley catalogs and specifications:
Field
Description
Notes
ALT_P_MARK
Alternate piece mark
BASE_DIA
Diameter of base
BASE_LEN
Length of base
BASE_OD
BASE_THK
Thickness of base length
BASE_WEB
Thickness of base diameter
BOLT_D_X_L
"Bolt Diameter" X "Bolt length"
BOLT_DIA
Bolt diameter
BOLT_INC
Bolt increment factor
BOLT_LEN
Bolt length
BOLT_TYPE
Bolt type
BOLT_UNITS
Bolt units
BOLT_XCESS
Reserved for future use
BOWL_DEPTH
Depth of the bowl or basket
BP1_END
Center of radius to end
BRAN_SIZE
Branch size
CATALOG
Catalog from which data was compiled
CENT_THK
Thickness of the collar on unions
CLAMP_WDTH
Length of clamp connection
COMP_ID
Component inside diam.
COMP_LEN
Component length
COMP_OD
Component outside diam.
COUP_OD
Diameter of strainer’s branch
COUP_TH
Thickness of strainer’s branch
CTR_END_B
Center to end (branch)
CTR_END_M
Center to end (main)
CTR_END_R
Center to end (redu.)
CTR_TO_CTR
Center to Center
DIAPH_LEN
Diaphragm Length
DNSTRM_CON
Downstream connection
DNSTRM_LEN
Downstream length
EC_CLASS_NAME
OPM Class Name
END_COND_1
End Condition
END_COND_2
END_COND_3
F_EL_F_ELB
Facing of elbow to facing of elbolet
FACING_1
Facing
FACING_2
FACING_3
FLANGE_LEN
Flange length
FLATS
Diameter from flat-side to flat-side on unions
FLNG_OD_M
Flange outside diam (main)
FLNG_OD_R
Flange outside diam. (redu.)
FLNG_TH_M
Flange thickness (main)
FLNG_TH_R
Flange thickness (redu.)
GASKET_THK
Gasket thickness
GRV_WDTH_B
Length of grooved (bran)
GRV_WDTH_M
Length of grooved(main)
GRV_WDTH_R
Length of grooved (reduced)
GSK_SEAT_B
Length of gasket(bran)
GSK_SEAT_M
Length of gasket(main)
GSK_SEAT_R
Length of gasket(reduced)
HANDWL_LEN
Handwheel length
HANDWL_OD
Handwheel outside diam
HGHT_HEAD
The height of the head on plugs
INS_LEN1
LONG_DESCR
Long description
MANU_FACT
Manufacturer
MATERIAL
Material
MEAS_UNITS
Units of measure; imperial (IM) or metric (ME)
METER_LEN
Meter length
METRIC_EQV
Metric equivalent
NOTES
Bentley catalog notes
NUT_LEN
Nut length
OFF_SET
Offset
(Pipe_od_m-Pipe_od_r)/2 for eccentric reducer
OPERATOR
Operator
OPTIONCODE
Default choice for drawing preference
For AP3D components, a “1” in this field will make it the default spec choice
OUTLET_RAT
Outlet rating
PIECE_MARK
Piece mark
Gtype,Stype,Main_size
PIPE_OD_B
Pipe outside diam. (bran)
PIPE_OD_M
Pipe outside diam (main)
PIPE_OD_R
Pipe outside diam (redu)
PIPE_SEPR
Gap between connected components
PLATE_THK
Plate thickness
PROJ_TOP_B
Projection from top to bottom
QTY_PERSET
Quantity per set
RADIUS
Radius of elbow
RATING
Rating
REV
Bentley revision code.
ROOT_GAP
Gap distance between fitting and olet
RUN_RATING
Run rating
RUN_SIZE
Run Size
SCHEDULE
Schedule
SETBACK
The set back depth
SHOP_FLD
Shop/Field designation
SHORT_DESC
Short description
SKT_DPTH_B
Socket depth (branch)
SKT_DPTH_M
Socket depth (main)
SKT_DPTH_R
Socket depth (redu.)
SORT_CODE
Sort Code
SPEC_CRITERIA_ROW
Criteria Row
Required for different functions in SpecGen and should not be edited by the user.
SPEC_GROUP
Section Name
STUB_THK
Stub thickness
SYS_ID
Unique System ID code
Unique component indexing field used by AP97 applications
TAG
Tag
TAKEOUT
Takeout
TAKEOUT2
TANGENT
Distance from end of to tangent
THD_ENG_B
Thread engagement (branch)
THD_ENG_M
Thread engagement (main)
THD_ENG_R
Thread engagement (reduced)
TRIM_1
Trim
TRIM_2
TRIM_3
UPSTRM_CON
Upstream connection
UPSTRM_LEN
Upstream length
WEIGHT_DRY
WELD_THK
Weld thickness
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/13028.openplant-specification-generator
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!