Wafer connection of components having different FACING/RATING values is not allowed in OpenPlant Modeler even though the mapping of those Facing/Rating is defined in the PCF file as shown below.Even though ratings PN10 and PN16 are mapped in the PCF file but it still shows below error.
How to Configure OpenPlant to Allow Flange Connection with Different Facings Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Component … Last edited over 7 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki 2 comments