How to prepare a catalog of Basket and T-Strainers ?

Hi Przemyslaw,

You can refer to out of the box catalog NON-STANDARD for basket strainer. For T-Strainer there is no entry in the catalog but we do have T-Strainer in out of the box mEX-OPM spec.

Hope this helps!

Regards,
Harpreet

Hi Harpreet,

I found these basket strainers in Non-standard catalog before. But it's not resolve my problem. I don't know which columns with values represent which physical parameters of strainer. 

Here's a deal: I need to insert filters into my project, as You see below (simple shape, screwed connections):

T_STRAINER will be the best well-fitting in my opinion.

Hello Przemysław Chmura,

Exact information about fields contained in factory-shipped Bentley catalogs and specifications can be found in C:\Program Files (x86)\Bentley\OpenPlantModeler V8i\Documentation\OPSpecGen.chm Help file. Open this file and go to OpenPlant Specification Generator >Provided Specifications>Field Reference.

As well you can check how these strainers are created in Non-standard.mdb catalog and compare information with the same model in OpenPlant Modeler.

It is not much but we hope this information will still have some use.

Regards,
Kestutis Mitkus

Hello Przemysław Chmura,

Exact information about fields contained in factory-shipped Bentley catalogs and specifications can be found in C:\Program Files (x86)\Bentley\OpenPlantModeler V8i\Documentation\OPSpecGen.chm Help file. Open this file and go to OpenPlant Specification Generator >Provided Specifications>Field Reference.

As well you can check how these strainers are created in Non-standard.mdb catalog and compare information with the same model in OpenPlant Modeler.

It is not much but we hope this information will still have some use.

Regards,
Kestutis Mitkus