Seeking information on the placement of Pressure Relief Valves with different inlet / outlet pressures. Have RV's with inlet CL300 and outlet CL150 the system will place the RV but the outlet flange can not be place due to a rating incompatibility. The Inst spec has the ratings defined in the outlet pressure field as the correct rating but it appears the the master rating of the component is overriding the other values. Have tested with the supplied Bentley Inst spec and the same issue occurs.
Is it possible to have mixed ratings for this component or is this a schema change.
Regards
Grant
Answer Verified By: Grant Wheatley
Hi Harpreet, is there away to force the orientation off a cone topworks when added to a RV. Currently when placing the topworks to allocate space for clash checking the cone will only orientate in the horizontal plane not the vertical. Using all the AccuDraw settings has no effect on the placement orientation.
Hello Grant,
Yes you are correct. This is not currently supported. There is an existing enhancement for this. However on additional note we would like to request you to create a service request to get this logged to prioritize the issue.
-Regards | Rahul Kumar
Regards,
Rahul Kumar
Product Engineer – Global Technical Support | Community Moderator