FINAL.POS FILE ID TEXT DEFINITION

Question

does any one know where i can find the Final.pos ID Text definition, i would like to know what all the numbers on the text id mean. 
 refer below. 
 thank you 
 kevin

Abhijit Bute · Answer

Hello Kevin, 
 Text Id -600 to -699 is user defined you can write query to get specific attribute in isometric backing sheet, 
 add next id in position text to get those attribute. 
 
 For more details please refer following communities link: 
 http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/4208.adding-data-from-the-process-table-to-isogens-output-tn 
 Also you can achieve desired result by editing "Opcfhdr.ebs" file. 
 http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/18997.how-to-add-area-unit-service-in-isogen-backing-sheet 
 Hope this helps. If you have any further question please do let me know. 
 Looking forward to your reply. 
 Regards, 
 Abhijit Bute

Keith.Couvillion · Answer

-600 Attributes -600 to -699 are for User Defined 
-700	North Arrow X-Y Position on isometric 
-702	Drawing (Sheet) Number 
-703	Number of Drawings (Sheets) 
-704	Total Weight for a Drawing 
-705	Total Fabrication Weight 
-706	Total Erection Weight 
-707	Total Offshore Weight 
-708	Flange Part Number ( Flat Spools ) 
-709	Flange Rotation Angle ( Flat Spools ) 
-710	Total Weight Unlisted Items 
-711	Total Weight of Pipeline 
-712	Total Wet (Full) Weight of Pipeline 
-713	Total Insulation Weight for Pipeline 
-714	C of G Position of Dry (Empty) Pipeline 
-715	C of G Position of Dry Pipeline + Insulation 
-716	C of G Position of Wet (Full) Pipeline 
-717	C of G Position of Wet Pipeline + Insulation 
-718	Total Pipeline Fabrication Weight 
-719	Total Pipeline Erection Weight 
-720	Total Pipeline Offshore Weight 
-721	Zone 1 Identifier 
-722	Zone 2 Identifier 
-723	Zone 3 Identifier 
-724	Sequence Number 
-725	Spool Weight ( Style 4 Material List ) 
-726	Spool C of G Position ( Style 4 Material List ) 
-727	Weld Diameter Inches ( Spools ) 
-728	Spool C.L. Length 
-729	Spool Erection Factor 
-730	Pipeline Erection Factor 
-731	Weld Diameter Inches (Pipeline) 
-732	Location Point - to nearest Steelwork Stanchion 
-733	Location Point - above nearest Floor Level