I am trying to make equipment nozzle tag (nozzle on equipment, not piping nozzle) to show in pipe line continuation but with no success. I am using sample MMetric project and have added a new label for it.
My AutoPLANT version is 08.11.12.226 and OPIM version is 08.11.11.103 (also tried on OPIM version 08.11.09.574)
Can any one give me a hint?
Thanks,
Maggie
Hello Maggie,
This is know issue already filed defect for this issue and it has been fixed in 08.11.12.235 patch.
You need to install this patch over 08.11.12.226 build.
After installing this patch you do not need to create any separate user label for nozzle. Generated isometric shows equipment nozzle information.
Hope this helps. Looking forward to your reply.
Regards,
Abhijit Bute
Answer Verified By: Maggie Zhang
Below is one similar wiki article created on displaying Equipment Tag, Facing Rating Etc.
Wiki -
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/17255.how-to-display-nozzle-rating-and-facing-information-on-connection-continuation-in-openplant-isometrics-manager
HTH,
-Regards | Rahul Kumar
Rahul Kumar
Product Engineer – Global Technical Support | Community Moderator