Report OPM Model Name on the Isometric OPIM

Hi,

How can the OPM model name be shown on the OPIM Isometrics as an automatic field?

This would need to be written out as part of the imodel and then linked to a TAG in the OPIM style, but I'm unsure how to do this.

Parents
  • Hello Ray, 

    Check below wiki for reference. You can use drawing name to populate on isosheet. 

    http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/22211.to-change-isometric-output-drawing-name-format

    Also let me know where you need to populate in drawing with some sample or images. 

    HTH,
    -Regards | Rahul Kumar

    Regards,

    Rahul Kumar

    Product Engineer – Global Technical Support | Community Moderator

Reply
  • Hello Ray, 

    Check below wiki for reference. You can use drawing name to populate on isosheet. 

    http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/22211.to-change-isometric-output-drawing-name-format

    Also let me know where you need to populate in drawing with some sample or images. 

    HTH,
    -Regards | Rahul Kumar

    Regards,

    Rahul Kumar

    Product Engineer – Global Technical Support | Community Moderator

Children