Problem of placing angle valve adout Openplant

Question

why couldnot placing a angle valve,there are just gate valve and ball valve that could be used,As picture. 
 Regards, 
 JL

Kestutis Mitkus · Answer

Hello JL, 
 Answer to your question is posted in this Bentley Communities wiki article: http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/31917.no-component-found-with-initial-selection-from-specs-appears-while-placing-component 
 I hope this information will be useful. Please let me know if you need additional help on this topic or if you have other concerns/questions. 
 Best Regards, Kestutis Mitkus

Rahul Kumar · Answer

Hello J L, 
 With above suggestion guided by Kestutis, you can also check below wiki article to see if some table missing in schema. 
 http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/22009.how-to-map-spec-table-for-placement-of-missing-component 
 HTH 
 -Regards | Rahul Kumar