Hi,
When I tried to start OPIM SS6 from command line, I've got the following error.
I've tried to run with a elevated cmd session as well and same error occurs. Any particular reason why that is the case?
Best regards,
Tuan Le
I would say you should be able to, Bear. Can't see why not.
Is it possible to do similar in vbscript? I use hta files to a similar effect.
Thanks very much Kestutis. Change the current directory does the trick. Any chance I can request this quirk removed? We usually use our in house interface to launch bentley software, and now Isometric Manager has to be treated differently from the rest. And that's not ideal.
Best regards, Tuan
Hi Tuan Le,
Don't know if there are any rules, but seems like this *.exe can be started only if user will go to its location and separately launch it.
If there is requirement to stay on same directory, then a way back can be added.Using && you can combine several commands and accomplish required actions.I hope this information will be useful. Please let me know if you need additional help on this topic or if you have other concerns/questions.
Kestutis M.
Best Regards,Kestutis Mitkus
Application Engineer, Building, Structural & Plant
Answer Verified By: Tuan Le