OPM SS6 - Silent Installation

RE: OPM SS6 - Silent Installation

Tuan Le — Thu, 02 Nov 2017 23:20:02 GMT

I'll have to dig out the notes as all files was handed over to IT who looks after PC installation. But the idea was copying the implementation of "Autoinstall" switch in the Bentley Microstation Prerequisite pack to the Autoplant Prerequisite.

RE: OPM SS6 - Silent Installation

Rahul Kumar — Thu, 02 Nov 2017 06:13:37 GMT

Hello Tuan Le,

If you need to upload any files, use below link.

Link to upload - https://bentley.sharefile.com/r-r77f1a0f5b36407fa

-Regards | Rahul Kumar

RE: OPM SS6 - Silent Installation

Gaurav.Gundecha — Wed, 01 Nov 2017 21:31:04 GMT

Hello Mr. Tuan,

I am trying to do something similar, can you please share the details of what exactly you did with HTA?

Thanks,

RE: OPM SS6 - Silent Installation

Kestutis Mitkus — Thu, 27 Jul 2017 12:05:10 GMT

Hello Tuan,

As I understood you achieved AutoPLANT Silent installation, but now you have issue with restart dialog during OpenPlant Modeler silent installation.
If you are using any command for silent installation of OpenPlant Modeler, then you can add this ending of this command /qn/quiet/norestart. It will only work if it's put at the end. Note the sequence of the command - it should be the same as in the above example. It will not work if you shuffle the commands.

/qn - Suppresses the UI of the installer. /qn is a silent install and /qn+ is a silent installation with a single modal dialog indicating that the installation is complete.
/quiet - Quiet mode, no user interaction.
/norestart - Do not restart after the installation is complete (product will not restart after the installation is complete).

Hope this will help you, if no then maybe you could give us more information how are you installing silently? What command are you using?

Regards,
Kestutis M.

RE: OPM SS6 - Silent Installation

Tuan Le — Thu, 27 Jul 2017 00:30:40 GMT

Hi,

Just wondering if there's any update on this one?

Tuan

RE: OPM SS6 - Silent Installation

Tuan Le — Thu, 20 Jul 2017 13:23:17 GMT

Hi,

Just wondering if there's any update on this one?

Tuan

RE: OPM SS6 - Silent Installation

Tuan Le — Tue, 18 Jul 2017 23:57:19 GMT

Hi Rajesh,

Just an update, I managed to build an AutoInstall switch into the HTA interface for the prerequisite pack so that's fine now. Just wondering if there's any chance the "restart" dialog can be bypassed at the end of OPM installation?

best regards,

Tuan

RE: OPM SS6 - Silent Installation

Tuan Le — Tue, 18 Jul 2017 14:45:38 GMT

There's also a "restart" dialog box at the end of the OPM installation as well. If that can be bypassed, that would be great.

RE: OPM SS6 - Silent Installation

Tuan Le — Tue, 18 Jul 2017 00:06:40 GMT

Thanks Rajesh. I've done a few tests. A silent deployment image for OP SS6 U3 was created. However it seems the Structural Sync Sever and Prerequisite packs are still required to be installed prior to running the deployment image.

I can set the Structural Sync Sever installation to quiet mode. But the Prerequisite pack even when run with the /q switch, still requires initial user confirmation before running. That's where I'm stuck at the moment.

RE: OPM SS6 - Silent Installation

Rajesh Agrawal — Mon, 17 Jul 2017 18:47:46 GMT

Hi Tuan

Thanks for your concern.

We are working on it and get back to you soon.

Regards,
Rajesh Agrawal