OpenPlant - Pipe offset symbol

Hi,

I'm having a quality issue with the way pipe offsets are shown in Openplant.  It's very cluttered.  Is there any way I can have it so the offset is shown above it with the dimensions for the offset, to keep it out of the way, like the way it would be done if hand-drawn?  Or are there setting I can adjust to improve it perhaps?  Thanks

Parents
  • Hello Sean,

    Thanks for Posting your Query on Plant forum.

    First I want to know version of OpenPlant Isometric Manager you are using.

    Yes, you can modify scaling of Elbow where you are getting bunch of dimensions. Refer Example 5 of below WIKI link to achieve same.

    Add below Rule in Overrides.txt file present in your style config folder.

    Example #5: I want bigger bends in a specific color
    RULE
    INCLUDE = IE_TYPE=CT_ELBOW
    SCALE = 4
    COLOR = 2

    WIKI to Refer

    Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes…
    Last edited in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
    1 comment

    Hope this helps.

    Regards,
    Abhilash Panchal
    Product Engineer - Bentley Systems

    Are you a CONNECTED User? Click here to find out more.

    Find out whats inside Connect Advisor Update 2. Click here

    Produce 3D models of existing conditions and Bring them to life!!

    Answer Verified By: Sean Crowley 

Reply
  • Hello Sean,

    Thanks for Posting your Query on Plant forum.

    First I want to know version of OpenPlant Isometric Manager you are using.

    Yes, you can modify scaling of Elbow where you are getting bunch of dimensions. Refer Example 5 of below WIKI link to achieve same.

    Add below Rule in Overrides.txt file present in your style config folder.

    Example #5: I want bigger bends in a specific color
    RULE
    INCLUDE = IE_TYPE=CT_ELBOW
    SCALE = 4
    COLOR = 2

    WIKI to Refer

    Applies To Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Settings/Attributes…
    Last edited in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
    1 comment

    Hope this helps.

    Regards,
    Abhilash Panchal
    Product Engineer - Bentley Systems

    Are you a CONNECTED User? Click here to find out more.

    Find out whats inside Connect Advisor Update 2. Click here

    Produce 3D models of existing conditions and Bring them to life!!

    Answer Verified By: Sean Crowley 

Children