Hi Gents
Where I can find the help or manual for the development on OPM, specially for "Supports" module, because I want make some dummy in the pipe line and make them show a MTO in ISO drawings. the dummy can include the pipe shoe type, line guide type, line stop type etc. could someone have any suggestion?
Further it's very helpful if there are some document to show how to develop our own supports type as in the picture above?
Any idea?
Hi You Quanwu,
Thanks for posting your query on Plant forum!
In OpenPlant Modeler, you could use Generic Support for custom support creation. For more details you could also use OpenPlant Support Engineering for detailed support modelling.
Please refer below wiki for some background on OpenPlant Support Engineering.
OpenPlant Support Engineering v8i OpenPlant Support Engineering OpenPlant Support Engineering (OPSE) is an application which will provide complex design and Modeling of Support for Piping, Structural, Electrical and HVAC Components.… Last edited over 3 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
HTH,
-Regards | Rahul Kumar
Regards,
Rahul Kumar
Product Engineer – Global Technical Support | Community Moderator
Hi Rahul
where I can find the Generic Support command in OPM V8i edition? Do you have any suggestion on custom support creation?
Dear You Quanwu,
You can check Support tab where you could find Generic Support Location. This will help you to create/Engage space for Support by placing boxes and adding property information.
HTH
<Bentley_5F00_Communities_5F00_RGB_5F00_Stacked_5F00_244x88-png_2D00_125x44-png> Update from Bentley Communities <4U4CH0FZZHMT-png_2D00_70x70x2-png> Rahul Kumar Dear You Quanwu, You can check Support tab where you could find Generic Support Location. This will help you to create/Engage space for Support by placing boxes and adding property information. <2018_2D00_07_2D00_16_5F00_19_2D00_39_2D00_17-jpg_2D00_640x640-jpg> HTH -Regards | Rahul Kumar View online You received this notification because you subscribed to the forum. To unsubscribe from only this thread, go here. Flag this post as spam/abuse.
<2018_2D00_07_2D00_16_5F00_19_2D00_39_2D00_17-jpg_2D00_640x640-jpg>
View online
You received this notification because you subscribed to the forum. To unsubscribe from only this thread, go here.
Flag this post as spam/abuse.
Currently OpenPlant Modeler delivers with this feature. Regarding OPSE integration inside Open Plant Modeler, you may write directly to Product Management Rob.harper@bentley.com or Abbas.ali@bentley.com
I am sure you will get some positive news and roadmap on OpenPlant Support Engineering.