I'm having issues getting isos out of Isosheet Manager and OPIM. No error alerts.
Where exactly does OPIM get it's cfg variables from? Is it simply using "C:\Program Files (x86)\Bentley\OpenPlantIsometricsManager V8i\OpenPlantIsometricsManager\Bentley.Isometrics.App.exe"?
Thanks,
hello Bear,OPM uses OpenPlant Isometrics Manager (OPIM) to produce isos.In OPM you use Pipeline Manager to create isos sheets (automatically).When you click to process the isos, OPM exports modeldata to an exchange folder: c:\Users\<name>\AppData\Local\Bentley\OPIM\OPMExport\This folder contains a runfile specifying the iso style and other necessary parameters.OPIM runs in the same configuration tree as OPM.OPM kicks-off OPIM as child process.OPIM starts with reading the product configuration from:C:\Program Files\Bentley\OpenPlant CONNECT Edition\IsometricsManager\config\After that it reads the project configuration from:C:\ProgramData\Bentley\OpenPlant CONNECT Edition\Configuration\Workspaces\WorkSpace\WorkSets\<project name>\Standards\OpenPlant\Isometrics\Regards,Klaas
Thanks for that Klaas. Appreciate the reply as it has been hard to get this information. The reason for asking is that I'm not seeing OPIM configs update as they change or are set in OPM. Almost as if it ignores them and only uses what is set by a few config files of it's own. I'll do a bit more digging.
Klaas, the other issue, as stated in the title, is that I'm using V8i SS6. Is this different??
Hello Bear,
There is no difference in processing what Klaas had pointed to. Only difference is the path in CONNECT & v8i.
You may also check below wiki article for some idea.
How to Point to Shared Workspace of OpenPlant Modeler Applies To& Product(s): OpenPlant Isometrics Manager Version(s): 08.11.09.XXX (SS5) | 08.11.11.XXX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Open/Save Subarea… Last edited over 5 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
If still some assistance would require, we can check in live meeting via Service request.
HTH,
Regards,
Rahul Kumar
Product Engineer – Global Technical Support | Community Moderator
Thanks Rahul, but I'm receiving some assistance through Salheen.
Glad you are getting direct and close assistance with Bentley. Hope it should resolve soon.