Pipeline Isometrics manager question

Hello,

I do have a model of pipe run from one tank to another . It has 2 pipeline numbers. I have no problems creating iso sheets for these runs. It splits them automatically and provides end labels so I know which sheet to look on. 

I was wondering how can I create one iso sheet with both pipelines on the same page? I don`t see an option for it.

My second question would be : how to eliminate suffix at the end of generated isosheets? -iso-1,2,3 etc?

Thank you.

Parents
  • Dear Alex, 

    Like suggested below by Jaya and Deepak,

    1. Iso sheet generations are based on Pipeline. Pipe run concept is not applicable in OpenPlant Modeler. 

    2. On second query Iso-NUMBER is a combination of Static text 'iso' and property NUMBER, which primarily helps to distinguish isosheets during the split of a pipeline when there are multiple fittings and components associated with that pipeline and thus to reduce the elements it require splitting and hence the nomenclature. However if there are other ideas you may definitely pursue it as per wiki link provided below:

    HTH, 

    Regards,

    Rahul Kumar

    Product Engineer – Global Technical Support | Community Moderator

Reply
  • Dear Alex, 

    Like suggested below by Jaya and Deepak,

    1. Iso sheet generations are based on Pipeline. Pipe run concept is not applicable in OpenPlant Modeler. 

    2. On second query Iso-NUMBER is a combination of Static text 'iso' and property NUMBER, which primarily helps to distinguish isosheets during the split of a pipeline when there are multiple fittings and components associated with that pipeline and thus to reduce the elements it require splitting and hence the nomenclature. However if there are other ideas you may definitely pursue it as per wiki link provided below:

    HTH, 

    Regards,

    Rahul Kumar

    Product Engineer – Global Technical Support | Community Moderator

Children
No Data