Hello everyone,I want to create a catalog for pharmaceutical equipment (pipe, elbow, reducer, ...).Fitting (elbow and reducer) are welded and have a straight part at each end.In attachment the picture of an elbow and a reduction.Can you tell me how to enter the parameters in their respective table.in the meantime,Best Regard
Hello Salim,
You can refer below article for fitting type Elbow:
To Create Elbow Fitting with Clamp Length in OpenPlant Modeler Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.87 (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Component Subarea: Elbow Original Author… Last edited over 7 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
For Reducers, currently its a known issue. Please create a service request, so that we can log an Enhancement item to it and to supply workaround if any.
HTH,
Regards,
Rahul Kumar
Product Engineer – Global Technical Support | Community Moderator
Hi Rahul Kumar,Thanks for the answer.For the reducer I have an alternative solution.For elbows, does it work with the catalogs supplied with OPM SS6 or does it work only with a spec file (mEX-OPM spec)Best regards
It will work for all catalogs. User need to check for the database field entries.
Hi Rahul Kumar,Thanks for the answer.Everything is workingBest regards