How to get Spool id on Isometrics??

Question

Hello Everyone, 
 i want to get the spool id on isometrics but unable to generate it 
 also, can we get the same spool id on isometrics which is already given in 3D model? 
 the exact requirement is, the spool id must be generate only reflecting the spool number which is already define in 3D model. 
 please suggest the procedure to get the spool ids. 
 Thanks in Advance! 
 Regards, 
 Vishal

Frank Pluim · Accepted Answer

Hi Vishal, 
 If you want to use the spool numbers from OPM you should use SPOOL_NUMBER in your user label instead of SPOOLID. 
 
 SPOOL_NUMBER is set by OPM 
 SPOOLID is set by OPIM 
 
 So something like: Spool - $(SPOOL_NUMBER) 
 BTW: In OPIM CE we have much better handling for spools. There you can just select "Use spools from design system" and everything is done automatically 
 Regards, Frank

Rahul Kumar · Answer

Hi Vishal, 
 thanks for the response here. 
 You could try in text as Spool - $(SPOOLID) , as spool is static text which you should mention without $ sign. 
 Please share image if still some issues. 
 HTH,

Rahul Kumar · Answer

thanks Vishal for all information. 
 I could see in User labels flags mentioned as P. Can you please try by changing flag to S. Below image for reference taken from default setup. 
 
 In case still there is an issue, Please upload DGN file for our testing and reference on below link provided. 
 
 HTH,

How to get Spool id on Isometrics??

Top Replies