Hello,
I'm hoping someone can help me to get 2 sets of bolts appearing on my lugged knife gate valve.
In my catalogue I have END_COND_1 and END_COND_2 set to "LUG" but it only places one set of bolts (similar to a wafer valve).
So is "LUG" the correct end condition for this valve? Or is there something wrong with my joint mapping?
Thanks for your help.
Hi Grant,
To make it a proper LUG End type connection you can revisit project configuration file (*.pcf) and correct the variable. OPM_CUSTOM_FLANGE_TYPE_END_PREPS = LAP_JOINT_END; LUG_END
For more details check below wiki article for reference.
To Query Correct set of Bolts on LUG END Type Joint in OpenPlant Modeler Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.581 (SS5) | 08.11.09.87 (SS6) Environment: Windows 7 (64 bit) | Windows 8.1 Area: Component Subarea… Last edited over 7 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
HTH,
Regards,
Rahul Kumar
Product Engineer – Global Technical Support | Community Moderator
Thanks for the response, Rahul, but unfortunately it still isn't working.
Ok Grant,
Lets take it Offline. I will send email to you.