OpenPlant V8i Component Scripting C# Settings for the values FACING

Question

Hi , everyone 
 
 I created an add-in project to insert my own element (valve). 
 
 Everything is built well, but the FACING attribute values for the ports do not work. 
 
 My element has 2 ports: mainPort and runPort . For each of them there can be different values of the attributes FACING_1 and FACING_2 . 
 But when you insert an element into the project, for all ports the same values are set equal to FACING_1 . 
 
 Please tell me where the settings for the values FACING_1 and FACING_2 are carried out. 
 
 Regards, Vitaliy

Rahul Kumar · Answer

Hi Vitaliy, 
 What I understood here is - You need to set two different facing value say RF-FF to one component. 
 Placement logic defined as - FACING property should be same if MAIN_PORT & RUN_PORT value of NOMINAL_DIAMETER or END_PREPARATION matches with each other. 
 Hence in case you want to have same nominal dia, you need to change End Preparation detail for RUN_PORT and can try it out. 
 Hope it helps here.