I'm getting this happen in a few places. I've tried redoing the connection spheres and nothing seems to work.
The weld note only seems to come out in some locations. Is there any restriction on pipe length to make this happen?
Weld symbol for FFW weld comes out fine, only note effected.
Any suggestions welcome.
Hi Bear,
FFW labels (as almost all labels) are user labels. Please cross-check the include/exclude rules with the weld data to see if there's a problem. Labels are always placed no matter what space is left. Labels are not placed due to include/exclude rules or if the user label content is the empty string
Regards, Frank
Thanks for the feedback Frank. I'll check again, but have been through the user labels and couldn't see anything glaringly wrong. I've even deleted the connection, recreated them and then reapplied the FFW option.
More digging.
Thanks,
Frank, the other issue I found strange is that it's finding the information to place the FFW indicator cell, just no label.
I'm using above based on the Wiki.
Got it, Component State hadn't been set. Once set to Design, all working.