Hi, while using Open Plant Connect Edition Update 8 - Version 10.08.00.51, I try to produce Isometric drawings on an A1 sheet (Client supplied).
The default windows extent is quite small relative to the sheet size so I enlarged it.
However, once I go over a certain size (still too small to my liking), all the associated text move to the same location (outside the window extent btw) and the iso becomes impossible to read (ref picture below)
I looked around but couldn't find any clue on how to fix this issue.
Any help would be appreciated.
May following wiki link steps help you.
Hope this helps, Looking forward to your reply.
I have followed the above recommendations but still have the same issue.
Thanks for your help however, I'm still waiting to hear back from Aishwarya.
Could you please follow below suggestion.
1. Open Isoseed.dgn file.
2. Go to Level manager and display ON PLOT level.
3. Graphic of PLOT level interfering with windows extent area.
4. Increase Area of Rectangle which is on Plot level , so that it will not interfere with Windows Extent area.
5. Save the Seed file and generate isometric.
Hope this steps helps. Looking forward to your reply.
Answer Verified By: Philippe Sene
This was the issue, I applied your solution and it now works.
Thanks for your help.