BRCM reducer

Hello LongJun,

While creating new cable ladder using the Raceway Catalog Creation tool, you need to select the Reducer fitting to be displayed in the created catalog.

Go to Raceway Catalog Creation tool, and in Edit mode select the catalog to be edited and go to Fitting tab.

Select the Reducer fitting to be displayed in created catalog.



You can refer to the below WIkilink-

Hi Vaidyar,

As you can see in the picture, the reducer can show in the model.

But I just want it to show the "description "in BOM.

Hi LongJun,

Thanks for the discussion and sending the cable ladder files.
I checked at my end and the reducers description was displayed correctly in the Detail_BOQ report.



Can you check if Update database has been clicked before generating the BOQ report?

BOQ reads the descriptions and other parameters from the database hence we need to update database so that the changes made gets written to the database.

Kindly let me know if that helped regarding the concern.

HI Vaidyar,

Now I have try again.

Once I use the Detail Design--->Detail_BOQ, Then the description is shown.

But when I use the Raceway--->Detail_Raceway_Schedule_BOM, the cable tray reducer description is shown, but the cable ladder reducer is not shown.

HI Vaidyar,

Now I have try again.

Once I use the Detail Design--->Detail_BOQ, Then the description is shown.

But when I use the Raceway--->Detail_Raceway_Schedule_BOM, the cable tray reducer description is shown, but the cable ladder reducer is not shown.