Configuration Variables OPM_CUSTOM_EQUIP

Hello.
Tell me what the following config variables in OpenPlant Modeler Connect Edition
OPM_CUSTOM_EQUIP_PROCESS_PARAMETRIC_ELEM
OPM_CUSTOM_EQUIP_CONVERT_TO_NONPARAMETRIC
OPM_CUSTOM_EQUIP_PROCESS_PARAMETRIC_SOLIDS

Parents
  • Hi Valery

    This config variables are used when a custom defined equipment is of parametric type. We need to enable 1 and 3 variable to Ture or 1. 

    So lets assume that custom equipment is created using two parametric solid (containing hole feature, length feature its cell name) etc. In default application, if we create the custom equipment, all the parametric feature will be lost and solid geometry will convert into Smart Solid.

    But when the variable is turned ON, this will allow the flexibility to have the geometry as parametric and you can edit the applied features like hole edit, length edit and so on.

    I am not sure if this is fixed in case if someone is using PlantSight. There are some issues with this implementation when using with PlantSight, however without PlantSight no concerns.

    Thanks

    Answer Verified By: Rahul Kumar 

Reply
  • Hi Valery

    This config variables are used when a custom defined equipment is of parametric type. We need to enable 1 and 3 variable to Ture or 1. 

    So lets assume that custom equipment is created using two parametric solid (containing hole feature, length feature its cell name) etc. In default application, if we create the custom equipment, all the parametric feature will be lost and solid geometry will convert into Smart Solid.

    But when the variable is turned ON, this will allow the flexibility to have the geometry as parametric and you can edit the applied features like hole edit, length edit and so on.

    I am not sure if this is fixed in case if someone is using PlantSight. There are some issues with this implementation when using with PlantSight, however without PlantSight no concerns.

    Thanks

    Answer Verified By: Rahul Kumar 

Children