Hello
I have site coordinates that I'd like to use to offset the coordinates when an iso is generated. I have tried setting the GLOBAL_ORIGIN to the mine site coordinates based on this post: OPIM CE - Iso Coordinates not Matching Model - OpenPlant | AutoPLANT Forum - OpenPlant | AutoPLANT - Bentley Communities but it is not offsetting the coordinates when the iso is created. Is there another way?
Thanks,
Justin
Hello Jsutin,
Thanks for your question, along with GLOBAL_ORIGIN setting you have to setup IE_COORD_OUTPUT variable in style.cfg file.
Refer attached wiki for more details.
Grid Lines - OpenPlant Isometrics Manager Applies To Product(s): OpenPlant Isometrics Manager Version(s): V8i Environment: Windows Area: N/A Subarea: N/A Original… Last edited over 5 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
Hope this helps.
Regards,
Abhijit Bute
Hi Abhijit,
I have set the IE_COORD_OUTPUT = 4 but the coordinates have not updated. I want the iso to show these coordinates based on the mine site coordinates as shown here:
but the coordinates in the iso show this:
I found that using the IE_PlantNorth variable in the style.cfg file will give you the ACS coordinates if they are to be offset. Ensure to set the correct angle as well to get the right coordinates. For example, IE_PlantNorth = -20000 -20000 -20000 -25.