Bentley Communities
Bentley Communities
  • Site
  • User
  • Site
  • Search
  • User
OpenPlant | AutoPLANT
  • Product Communities
OpenPlant | AutoPLANT
OpenPlant | AutoPLANT Forum
    • Sign In
    • All tags
    • bolts
    • OpenPlant Modeler
    • 08.11.09.440
    • 08.11.09.568
    • 08.11.09.581
    • 08.11.10.xxx
    • 08.11.11.xxx
    • Bolt
    • Bolt Length
    • Bolt selection the spec grid
    • butterfly valve
    • check valve
    • Fastener
    • Flanges
    • Gasket
    • Gaskets
    • LUG End
    • Nozzle
    • Open Placement
    • OPM
    • Project. Pcf file
    • Single placement
    • Specification
    • SS5
    • valve
    • wafer
    • Bolt-Length Calculation [OPM – 10.07.00.32]

      Florian S.
      Florian S.
      Hello everybody, For your convenience, a “too long did not read”: I think the algorythm to choose a correct bolt length is not working correctly together with the Increment value “BOLT_INC”. It produces wrong values and does not represent the way…
      • over 3 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • RE: Replaced Bolts using Fix Disconnects

      Rahul Kumar
      Rahul Kumar
      Hi, I would like to suggest you to create a service request to enable it to be handled by some analyst, as it may require some deep investigation. HTH -Regards | Rahul Kumar
      • over 6 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • RE: OPM SS6 - Place bolt and gasket at open flange

      Rahul Kumar
      Rahul Kumar
      Hello Tuan, There could be many things included to place it on an open end. Bolt length/Gasket thickness to be predefined while placement. I would suggest you to log an SR for enhancement. HTH -Regards | Rahul Kumar
      • over 6 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • RE: OPM Bolt calculation, wafer item connected to Flanged Item length is incorrect

      Rahul Kumar
      Rahul Kumar
      Hello Ray, We are working on your issue based on SR you have raised. We will test the case various case you provided and update the results. -Regards | Rahul Kumar
      • over 6 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • RE: OPM SS6 - bolt missing between LUG butterfly valve and RF flanges

      Harpreet Singh
      Harpreet Singh
      Hi Tuan, Please see below wiki article for your reference. http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/27761.to-query-correct-set-of-bolts-on-lug-end-type-joint-in-openplant-modeler Regards…
      • over 6 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • RE: How to set a long bolt for wafer component in OpenPlant

      Rahul Kumar
      Rahul Kumar
      Hello Changsong, Is this happening with your custom spec with new End prep type which you have created? Have you also modified your JOINT class in schema? I have installed 08.11.09.568 on my machine & I am trying to reproduce the same at me end. …
      • over 6 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • RE: bolt issue for wafer type connection

      Rahul Kumar
      Rahul Kumar
      Hello Changsong, You can compare project pcf file and see for changes . Also you can compare End preparation type under JOINT class present in schema. Check below wiki for similar discussion on Wafer Lug End type. Wiki for reference - http://communities…
      • over 7 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • RE: OPM - Assign gaskets and bolts to a different level

      Harpreet Singh
      Harpreet Singh
      I have also created a wiki article for this. http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/30012.how-to-showhide-bolts-and-gaskets-in-openplant-modeler Thanks, Harpreet
      • over 7 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • RE: OPM Nozzle with a wafer item has no bolts

      Rahul Kumar
      Rahul Kumar
      Thanks Ray for Service Request! We have investigated the case and found that in latest version of OpenPlant Modeler there is no issue in connection & found it working correctly. you can check this with latest OpenPlant Modeler and test all issues. It…
      • over 7 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • Bolt issue in Openplant Modeler

      pekoll
      pekoll
      Hi Is it possible to update bolt description for bolts that are already in the model and spec is changed? I'm using Openplant Modeler 08.11.09.404. Pekka
      • Answered
      • over 8 years ago
      • OpenPlant | AutoPLANT
      • OpenPlant | AutoPLANT Forum
    • View related content throughout OpenPlant | AutoPLANT
    • More
    • Cancel
    Communities
    • Home
    • Getting Started
    • Community Central
    • Products
    • Support
    • Secure File Upload
    • Feedback
    Support and Services
    • Home
    • Product Support
    • Downloads
    • Subscription Services Portal
    Training and Learning
    • Home
    • About Bentley Institute
    • My Learning History
    • Reference Books
    Social Media
    •    LinkedIn
    •    Facebook
    •    Twitter
    •    YouTube
    •    RSS Feed
    •    Email

    © 2023 Bentley Systems, Incorporated  |  Contact Us  |  Privacy |  Terms of Use  |  Cookies