Is it possible to set spool break on field weld? or spool break when specific attribute changes? For example, a long pipe is modeled in two pieces with a field weld, we want to identify it as two spools. Is this possible? Thanks, Maggie

When placing Vic coupling, ie, Vic Coupling Rigid 07, in different way, it shows and differently in OPIM ISO op 1 - place a vic pipe, place a rigid 07 coupling, place another vic pipe - vic coupling class is AT_COUP_RIGID07 op 2 (most people…

It seems there is a limitation on size when doing tapping. When I have larger different on tapping sizes (such as 2"x1"), OPIM has no problem, but when tapping sizes different is less or equal to 1/2" (such as 2"x1+1/2" or 1"x3/4"), OPIM failed. Is…

Hi, Yesterday I ran into a hang issue on OPIM. I tried to generate ISO via OPIM in AutoPLANT, but it stopped on "Export Progress" window and telling "Preparation of data for OPIM", and OPIM manager never pop-up. And after this failing run, no other…

I am trying to figure out where to set width factor for the MText of material list after ISO is generated and converted to DWG. I have tried to change the ration of Height and Width of TextNode in isoseed file but with no luck, no matter what I set, the…

I need to get 3D model name to show in OPIM Iso output. I read thread Capturing the AutoPLANT model name when extracting an iso with OPIM but suggested solution does not work on my company setup. And then I was try to make doc_name as relationship object…

Hi, Currently I deleted the report text node to remove material report but I cannot find the option/ switch to remove Part ID in the ISO image. Is it a way to hide Part ID in Stress ISO? Thanks, Maggie

When I tried to run OPIM from AutoPLANT on a single pipe, component exportion looked OK, but get an null reference exception. Where I can find out what's the problem in order to fix it. Thanks, Maggie

Greetings, I cant get the Rating of either bolts, flanges, etc to appear on the report (bom), whist I can however get any field to appear. I modified the class and report file as indicated in the OPIM help pages but it doesn't seem to work for Rating…

Hi there, I'm looking for a way to grab the AutoPLANT model name that the iso was extracted from when using OPIM, and placing that value into the iso as text similar to the txt2node & node2da methods. Thanks, Tyler

Recently I met an issue that when running OPIM in AutoPLANT with manual selection. If I manually select patial of the process line, even just a piece of pipe or a reducer, I got an error on fasterner, like weld, gasket, sometimes it says unconnected Components…

Hi, Is it a way to force coordination output on all ends of a process line? Originally, I thought it is a random case, but it looks like it happen often, especailly when one end is opened (no connection component). Any way to config or fix it? …

Previously I put text comments on pipe, and they looked OK. However, when I put a comment text on a branch end, such as a plug, it points to a strange location. Originally, thought it might something in my customization so I switched to the sample MMetric…

I am trying to show valve operator spindle direction, but I cannot find the setting. I tried to enable valve operator label, but it only shows operator name, like "HAND_WHEEL" (expecting SPINDLE NORTH or SPINDLE UP, etc) . How and where can I do the setting…

Hi, When I ran ISO on a bleed ring with tap port, the tapping point show in middle of bleed ring symbol instead of edge of bleed right. Is any settings I can set to make it show properly? Also why bleed ring show as Flange in Part ID? Can I split…

It looks like the bolt length has some length sensitive, some length can output as inches, and some not - remaining in mm. Anything I can do on this? Thanks, Maggie

I tried to display control valve tag in ISO image and it did. However, it displayed as one line instead of multi-lines. Can someone help? Thanks, Maggie