Comments or Corrections?
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!
Applies To | |||
Product(s): | OpenPlant Isometrics Manager, AutoPlant Modeler | ||
Version(s): | 08.11.09.XXX | ||
Environment: | Windows 7 64 bit | ||
Area: | Settings/Attributes | ||
Subarea: | - | ||
Original Author: | Keith Couvillion, Bentley Technical Support Group |
Isometric Styles
In order to control generation of different types of Isometric Drawings, an administrator will need to define new styles and modify existing styles and their base default values used for isometric drawing generation
General Information
The default location for style definition files is: C:\ProgramData\Bentley\Plant V8i\Bentley Plant V8i Projects\{project}\Config\OpenPLANT\Isometrics\styles\
The following styles are delivered with each example project. As delivered, they are configured identically.
As-Built
Check
IFC
Stress
Tracing
The Isometrics Configuration tool is used to define project and style settings for the Isometric drawings. The tool consists of two tabs:
Click Start – Select All Programs > Bentley > Plant V8i > Project Tools > Project Administrator
From Bentley Project Administrator:
Select a Project from the tree
From the Login to Project dialog:
From Bentley Project Administrator:
Click Start – Select All Programs > Bentley > OpenPlant Isometrics Manager > OpenPlant Isometrics Manager in AutoPLANT access mode
From the Open Project dialog:
From the Login to Project dialog:
From Bentley OpenPlant Isometrics Manager:
Select Tools > Configuration from the menu
Open the Isometrics Configuration tool
From the Isometric Configuration dialog:
From the Add Style dialog:
Open the Isometrics Configuration tool
From the Isometric Configuration dialog:
From the Remove Style dialog:
Click Yes
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!