The Component Placement section in the Configuration Manager controls the color, line style and line weight of piping and components in the drawing.
Open Bentley Project Administrator V8i
Select your project in the Browser Tree
Click OpenPLANT Isometrics
Click Create/Modify This opens the OpenPLANT Configuration Manager
Click the Isometrics Style tab
Select the relevant style from the “Style” option button
From the categories in the left pane, select “Component Placement”
Change any of the symbology configuration options and click “Save”
Use the steps below to set the symbology for pipe and bend components.
Open the Isometrics Configuration tool
From the Isometric Configuration dialog:
Use the step below to change the level (layer) for pipe and bends.
Select a level name from the drop down list
Type a new level name in the text box. The new level will be added to the drawing during creation.
Use the steps below to set the symbology for continuation components.
Use the steps below to set the symbology for existing components.
Sometimes components cannot be drawn in the iso. Most commonly this is due to a missing symbol in the cell library or an incorrect or missing mapping in the Supplemental Isometrics Isoextractor schema. The location of the failing components in the isometric drawing is indicated with a thick red circle. To change the symbology, set color, line style and line weight according to your preferences.
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!