To Remove the Rectangular Boundary in Open Plant Isometrics, user can use the custom.cel file to store its custom cell and use it whenever required.
Steps To Accomplish:
2. Click on ‘Open template file’ and select ‘Annotation’ DGN file and click open. See image below:
3. It shows all default label types. Select the label to customize. Say PLANTC for plant co-ordinate label.
4. Copy PLANTC label and past it below the table in order to define it in Custom.cel file. See image below:
5. Delete the boundary for new label as shown below:
6. Place Fence on PL_NTC and click on ‘Create cell’ option. See image below:
7. Select the Cell Library and provide cell name and description to it. See below:
8. Plant co-ordinate label PLANTC has been created in custom.cel library.
9. Save the changes and extract isometrics to verify the results. See below image:
Notes: a. If a template file as shown in point no 2 does not appears, copy the OPIM folder from below mentioned path to your workspace. C:\ProgramData\Bentley\OpenPlantIsometricsManager V8i\WorkSpace
b. User may create its own custom file with logical name and customize the label accordingly. To enable a new cell file type the name at first place in style.cfg in order to search the library at first, as mentioned in below image.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12647.modifying-symbols
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!