Overview
When using OpenPlant Isometrics Manager with AutoPLANT Modeler, it will show flow arrow symbol in the isometrics like below.
This can be easily removed if it is not required, by removing the description of the flow arrow from the AutoPLANT CLASS.ini file. By default the flow arrow's have description i.e. Flow Arrow. To see this double click or perform edit component on a flow arrow inside the AutoPLANT model as below:
Steps to Resolve
Settings/Attributes - OpenPlant Isometrics Manager To Discuss various settings desired to output Isometric drawings. See Index: For OpenPlant Modeler - OpenPlant Isometrics Manager Configuring the BOM and Reports Add End type Information in… Last edited over 5 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!