Questions about this article, topic, or product? Click here. 

Installation/Upgradation Steps for OpenPlant Isometrics Manager

Applies To 
Product(s):  OpenPlant Isometrics Manager
Version(s):  08.11.09.XXX(SS5) | 08.11.11.87/103 (SS6)
Environment:  Windows 7/8.1/10 (64 bit)
Area:  Open/Save
Subarea:  Installation
Original Author:  Abhijit Bute, Bentley Product Advantage Group

Background

OpenPlant Isometrics Manager installation can be done for both OpenPlant Modeler and AutoPLANT Modeler. During the installation user need to select the correct option provided for each product. Following are the steps for installation for both application, OpenPlant Modeler - OpenPlant Isometrics Manager & AutoPLANT Modeler-OpenPlant Isometrics Manager. 

OpenPlant Modeler - OpenPlant Isometrics Manager

Steps to Accomplish

After installation of OpenPlant Modeler, Run OpenPlant Isometrics Manager exe. See step by step procedure.
 
 

Note - Check OFF AutoPLANT Database Mode option when installing it for OpenPlant Modeler side. 
 
 



Click on Finish and OpenPlant Isometrics Manager is ready to use along with OpenPlant Modeler. 

AutoPLANT Modeler - OpenPlant Isometrics Manager

Case 1: To install a new version of OpenPlant Isometrics Manager.

Steps to Accomplish

After installation of AutoPLANT Modeler, Run OpenPlant IsometricsManager exe. See step by step procedure 
 
 

Note - Check OFF OpenPlant ModelServer Mode option when installing it for AutoPLANT Modeler side. 
 
 



Click on Finish and OpenPlant Isometrics Manager is ready to use along with AutoPLANT Modeler. 

Case 2: To upgrade an existing version of OpenPlant Isometrics Manager

Background:

When a version of OpenPlant Isometrics Manager exists on the user machine and he wants to upgrade it to the latest version then he needs to follow the below mentioned steps.

Steps to Accomplish

  1. From the Control Panel open Programs and Features.

  2. Confirm the version of OpenPlant Isometrics Manager.



  3. Select the OpenPlant Isometrics Manager and click on Uninstall.



  4. Now to install the latest version of OpenPlant Isometrics Manager follow the steps mentioned above.

See Also

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!

Anonymous
  • Offline over 5 years ago

    Hello Sae vander,

    Thanks for the comments!

    Please see below response for License information.

    a) If you run Isometric insession ( i.e. Within the AutoPlant Modeler option), OpenPLANT Isometrics Manager uses AutoPLANT modeler license.

    b) If you want to run isometric out session separately (i.e. Database Access Mode options)  then separate OpenPLANT Isometric Manager license would be required.

    Hope this helps.

    Regards

    Abhijit Bute

  • Offline over 5 years ago

    ¿What kind of license use this Autoplant Database Access Mode options?. ¿Uses a Modeler license or a OPIM license?

    We only have Modeler Licenses and we need to setup the OPIM first.

    Regards

Recommended
Related
Communities
Support and Services
Training and Learning
Social Media