You are currently reviewing an older revision of this page.
At times, user may want to add an additional field to isometric bill of material (i.e. Part Number, Vendor Catalog data etc.).following steps illustrate the procedures to add catalog field in isometric bill of material.
4. Click ok and close.
5. Open spec and build entire spec so that new field ‘TEST’ will be added in spec.
Refer following link.
https://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/4207.adding-a-new- descriptive-field-to-updateable-component-data-tn
Go to project administrator.
5. Click close.
6. Now maximize ‘Reports’ section click on setup.
7. Add ‘TEST’ Field. Refer below screen shot.
8. File>Save.
9. Now open AutoISO
10. Go to Isometric>Reports>Bill of materials.
11. Click on ‘Option’ below refer screen shot.
12 . Generate bill of material to review the result.
Product TechNotes and FAQs
https://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/4207.adding-a-new-descriptive-field-to-updateable-component-data-tn
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!