For OpenPlant Isometrics Manager, Pipe cut list requires End preparation details in isometrics. As per project requirement user may need to show some existing attributes.
In OpenPlant Isometrics Manager, the Pipe Cut List should include some specific end preparation details like BEVEL, SQCUT etc. in it. It can be done by customizing the BOM labels inside the schema and to get into Isometrics Manager by adding in its report definition file.
Please find below the steps to illustrate this example to include these attributes for both the AutoPlant Modeler and OpenPlant Modeler applications. Also note these are for the OpenPlant Modeler and OpenPlant Isometrics Manager applications.
In recent release of OpenPlant Isometrics Manager, user may try below wiki article link as reference.
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!
Hello Sephen Wood-Davies,
We also have alternative solution, if you are using the latest 08.11.09.564 version, then you could check below link. See step 7 & 8 useful for you.
However, we will check below situation and get back to you.
-Regards | Rahul Kumar