Applies To
	Product(s):	OpenPlant Isometrics Manager
	Version(s):	08.11.09.404 & above
	Environment:	Windows 7 (64 bit & Others)
	Area:	Settings/Attributes
	Subarea:
	Original Author:	Rahul Kumar, Bentley Product Advantage Group

For OpenPlant Isometrics Manager BOM report consist of PARTID numbers including other necessary description.

Background

In OpenPlant Isometrics Manager, using OpenPlant Modeler/AutoPlant Modeler various BOM report types also include PARTID, which allow each component/fittings to clearly distinguish one part from other parts when the difference is meaningful. Below are the steps signifies the sorting way for PartID.

Steps to Resolve

 A.    Reports Need for Down.

1. Open report.def file from either by navigating the project root under Config folder or by launching the isometrics manager and using the Advanced option.
   
   
2. Write the part ID as mentioned below. Also see report image shown below.
   
   GROUP = PARTID
   SORT = PARTID:N 
   
   
   
   
   
   
3. Save report.def file.
   
   
4. Generate isometrics and verify results. See image below.
   
   

              

 B.    Reports Need for Up

1. Open report.def file from either by navigating the project root under Config folder or by launching the isometrics manager and using the Advanced option.
   
   
2. Write the part ID as mentioned below. Also see report image shown below.
   
   GROUP = PARTID
   SORT = PARTID:ND 
   
   
   
   
   
   
   
3. Also write the combi report as mentioned below.
   
   
   
   
4. Save report.def file.
   
   
5. Generate isometrics and verify results. See image below.
   
   

See Also

communities.bentley.com/.../12642.configuring-the-bom-and-reports

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!