You are currently reviewing an older revision of this page.
In OpenPlant Isometrics Manager, the BOM report information may vary with respect to different requirements of the project, for example (FABRICATION, ERECTION, CONTINUOUS types).
In OpenPlant Isometrics Manager, using OpenPlant Modeler/AutoPlant Modeler various BOM report types required as mentioned above. It can be achieved through modifying the report.def file under the style folder present under each project. Various types of reports can be created and stored under the style folder, which can be later utilized by renaming the files by the user. The information below will help the user to achieve various types of settings. This can be experienced by using both OpenPlant modeler and AutoPlant Modeler. This has been shown in context with OpenPlant Modeler and OpenPlant Isometrics Manager. However a similar approach could be utilized for AutoPLANT Modeler and OpenPlant Isometrics Manager using the Isometric Configuration Dialog either using in session from within Project Administrator or from out of session using the Windows Start menu and launching the OpenPlant Isometrics Manager application.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12642.configuring-the-bom-and-reports
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!